Vertex Standard - VX- 920
INTRINSICALLY SAFE VERSIONS NOW AVAILABLE
The new VX-920 portables offer a wide range of features in several packages.
- 48 or 512 Channel Capacity
- No PF keys, 4 PF keys or 12 key DTMF pad plus 4 PF keys.
- Sub-Receiver for crossband operation
- Three-position toggle switch
- Freq Range of 134 – 174 MHz (in one radio, no sub-bands)
- Freq Range of 450 – 512 MHz (in one radio, no sub-bands)
- 700 mW audio output power
Sub-receiver option
The optional sub-receiver units make it easy to monitor an alternate band.
If your Police Department is on UHF, they can easily monitor VHF fire frequencies.
Get both departments on the new VX-920 portables and they will have complete crossband operation in a simple, inexpensive package.
Superior protection from dust and water intrusion ~ VX-920 ~
All VX-920 portables, as a standard feature, are rated for IP55 and IP57. This covers dust and water intrusion.
First, Ingress of dust shall not penetrate in a quantity to interfere with satisfactory operation of the apparatus or to impair safety.
IP55: Water projected in jets against the enclosure from any direction shall have no harmful effects.
IP57: Ingress of water in quantities causing harmful effects shall not be possible when the radio is submersed for 30 minutes at a depth of 3 feet.
Unsurpassed receive audio output
Following the sucess of our VX-600/900 increased audio power of 700 mW, these new portables pack the same 700 mW punch. |
Please contact us at
sales@iLoveRadios.com for more information about any
Vertex Radios. Thank you.
|
| Downloads |
Vertex VX-920 Brochure
Back to top 
Back to Vertex Radios Page |
| Alignment/Service Related |
| CT-110 |
Firmware writing cable (For use with the FIF-8) |
| FIF-8 |
Firmware Writer. Unit comes with a cable for the muli-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied). |
| Alkaline Battery Cases |
| FBA-34 |
Alkaline Battery Case VX-820/920 series |
| |
|
Back to top |
| Antennas |
| ATU-6A |
Antenna 410-430MHz |
| ATU-6D |
Antenna 450-485MHz |
| ATU-6DS |
Antenna 450-485 MHz / 3.5" |
| ATV-10A |
High Gain antenna, 145-155MHz (Red) / 10.5" |
| ATV-10B |
High Gain antenna, 150-160MHz (Brn) / 10.5" |
| ATV-10C |
High Gain antenna, 155-165MHz (Blk) / 10.5" |
| ATV-10E |
High Gain antenna, 165-175MHz (Org) / 10.5" |
| ATV-6B |
Antenna 150-163 MHz / 3.5" |
| ATV-6C |
Antenna 161-174 MHz / 3.5" |
| ATV-6XL |
7" untunned VHF antenna |
| ATV-8A |
Antenna 134-150MHz |
| ATV-8B |
Antenna 150-162MHz |
| ATV-8C |
Antenna 162-174MHz |
| ATW-1A |
Dual-band antenna for multi-band Rx: 134-151MHz / 450-520MHz |
| ATW-1B |
Dual-band antenna for multi-band Rx: 150-163MHz / 450-520MHz |
| ATW-1C |
Dual-band antenna for mulit-band Rx: 161-174MHz / 450-520MHz |
| |
| Back to top |
| Batteries |
| FNB-V86LI |
7.4 V 1150mAh Li-ion Battery |
| FNB-V87LI |
7.4V 2000mAh Li-ion Battery |
| FNB-V92LI |
FNB-V92LI BATTERY / 7.4V 3000mAh |
| FNB-V92LIIS |
Intrinsically Safe LiION Battery, 7.4 V / 3000mAH |
| Belt Clip |
| CLIP-17A |
CLIP-17A |
| Cases |
| CLIP-920 |
920 BELT CLIP |
| LCC-920S |
Leather Case with Swivel and Belt Loop |
| LCC-920S/TT |
Leather case w/ Swivel Clip and Keyboard Cut-Out |
| LCC-920SN1C |
Nylon Case, Swivel Clip, No Window for VX-921/971 & VX-P921/971 Series |
| LCC-920SN1D |
Nylon Case, Metal D Swivel, Lether Belt Loop, No Window for VX-921/971 & VX-P921/P971 Series |
| LCC-920SN2C |
Nylon Case, Swivel Clip, 1/2 Window for VX-924/974 & VX-P924/P974 Series |
| LCC-920SN2D |
Nylon Case, Metal D Swivel, Leather Belt Loop, 1/2 Window for VX-924/974 & VX-P924/P974 Series |
| LCC-920SN3C |
Nylon Case, Swivel Clip, Full Window for VX-929/979 & VX-P929/P979 Series |
| LCC-920SN3D |
Nylon Case, Metal D swivel, Leather Belt Loop, Full Window for VX-929/979 & VX-P929/P979 Series |
| LCC-920TT |
Leather Case w/Belt Loop and Keypad Cut-out |
| Charger |
| VAC-6920B |
120/240VAC 6 unit Multi-Rapid Charger w/ US power cable |
| VAC-920B |
120 VAC Desktop Rapid charger |
| VAC-920C |
240 VAC Desk top rapid charger |
| VCM-2 |
Vehicular Charger Mounting Adapter Kit for VAC-920 |
| |
|
| Back to top |
| Headsets and Surveillance |
| VH-111 |
Heavy Duty, Dual Muff, Over the head style, with Boom Mic |
| VH-121 |
3 Wire Mini Lapel Mic Surveillance Kit |
| VH-131 |
2-Wire Palm PTT Surveillance Kit |
| Programming and Installation |
| CT-108 |
PC programming cable (for use with the FIF-10 or FIF-10A USB Interface) |
| CT-109 |
PC Programming kit (Contains a VPL-1 programming cable and adaptor for the new VX-820/920 portables) |
| CT-110 |
Firmware writing cable (For use with the FIF-8) |
| CT-115 |
Programming cable only (requires VPL-1) |
| CT-116 |
Radio to Radio Programming Cable |
| FIF-10A |
FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included. |
| INST-OPT |
Installation Charge. |
| PROGRAMMING |
Factory Radio Programming (single channel only) |
| VX MPI |
Programming Kit for the MDC1200 and the FVP-35 |
| |
Back to top |
| Signaling |
| DVS-5 |
Digital Voice Storage Board (120 sec. max.) |
| FVP-25 |
Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000) |
| FVP-35 |
Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming |
| SRX-3 |
Dual Band Rx module. Adds UHF Rx to VHF radio (order special ATW antenna) |
| SRX-4 |
Dual Band Rx module. Adds VHF Rx to UHF radio (order special ATW antenna) |
| VMDE-200 |
MDC1200 Encoder/Decoder module |
| VME-100 |
The VME-100 is a plug-in ANI encoder capable of encoding MDC1200, GE Star or DTMF ANI per channel. |
| Speaker Microphones |
| MH-50D7A |
Public Safety Speaker Microphone w/toggle, MIL-STD Rated |
| MH-66A7A |
MH-66A7A Submersible Noise Canceling Speaker Microphone |
| MH-66B7A |
MH-66B7A Submersible Speaker Microphone with 2 Programmbale Function Keys and Audio Attenuator Switch. |
| |
| Back to top |
| Back to Vertex Page |
